MIC500S Series gas detector can be used in 24 hours continuous online monitoring of concentrations of multiple types of gases in the filed.The types for detection are more than 500 types.

With a 4-20 mA analogue output, can be simply integrated into a Distributed Control System (DCS) to provide warnings.

Simple to install service and calibrate, MIC500S requires no hot work permit and the PID sensor is accessible and changeable in a matter of seconds.

User-friendly, reliable and cost-effective way to ensure safety, compliance and productivity.

Strong, durable and explosion-proof shell is suitable for the use at a variety of hazardous places and harsh industrial environments, is widely used in the industries such as petroleum, chemical, metallurgy, refining, gas transmission and distribution, biochemical and pharmaceutical, and so on.

FEATURES

Fast and efficient gas detection function

①It can be used in 24 hours continuous online monitoring of single field gas concentration and the types for detection are more than 500 types.

② There are 7 gas units to display, and the units can be switched freely.

Units that can be selected: PPM, mg/m3, Vol%, LEL%, PPHM, ppb, mg/l.

Rich human-machine interface

①1.7-inch high-definition color screen, display the real-time concentration, and alarm state.

Diversified communication methods

①It is possible for the real-time monitoring via the wired or remote wireless transmission, and network transmission.

② Three-wire system 4 ~ 20mA standard signal and standard bus RS485 (modbus-RTU) simultaneous output.

③ It is possible to select frequency output 200-1000Hz, Hart protocol signal, 1 ~ 5V output, two-wire system 4 ~ 20mA, SMS alarm, wireless transmission (2 ~5 km or unlimited distance).

④ It is compatible with secondary instrument, data acquisition module, PLC, DCS system, and it is possible to drive the related equipment.

APPLICATION

The detector is widely used in petroleum, chemical industry,environmental protection, metallurgy, refining, gas, biochemical medicine, agriculture, fire protection, Archaeology and other industries and places that need safety monitoring for toxicity and harmfulness, explosion prevention.

SPECIFICATION
 
 	 			Gas
 			NO/NO2 			can be customized
 			Range
 			0-100ppm 			other ranges can be customized
 		
 			Size
 			210×170×85mm (L×H×W)
 			Weight
 			1.8 Kg
 		
 			Installation method
 			Pipeline Type 			Wall Mounting Type
 			Display
 			1.7-inch high-definition color screen
 		
 			Environment
 			Temperature: -40 ℃ ~ + 70 ℃ 			Humidity: ≤10 ~ 95% RH (regular)
 			Approvals
 			IP65; Exd Ⅱ CT6
 		
 			Accessories
 			Manual, qualification certificate, warranty card, outer packaging box
 		
 			Working Voltage
 			12 ~ 30VDC direct current, the standard power supply for a single equipment is 24V, DC stabilized voltage switching power supply of 1A or greater than 1A
 		
 			Working Method
 			Fixed type installation, online detection, diffusion type measurement; and it is possible to select the measurement of pipeline type, flow-through type, and pump-suction type.
 		
 			Connecting Cable
 			Adopted 4 ~ 20mA three-core shielding cable, adopted four-core for RS485, when the distance exceeded 100 meters, the single wire diameter ≥1.5mm; and the shielding layer will be connected to the earth.
 		
 			Optional items
 			Alarms;Wireless Transmission;Pretreatment System; SD Card; 			Temperature and Humidity Measurement; 			Accessory for connection with computer for monitoring.
 		
 			Installation Type Accessories 			(Optional configuration)
 			Wall mounting bracket, mounting clips for fixation on the pipes (1/2", 3/4" pipe),
 			stainless steel threaded welding seat or flange to be installed on the pipeline (it is necessary to mark the flange or pipe size, such as DN50, DN15 ...),
 			rain cover, 24VDC or 220AC sampling pump (sampling distance is 10 m), 			vacuum pump (sampling distance is 40 m),
24V switching power supply, pressure reducing valve, flow meters
 		
  
  	 			Gases to be detected
 			Range
 			Accurancy
 			Resolution
 			Response time T90
 		
 			Oxygen gas ( O2 )
 			0-30%Vol
 			＜±2%(F.S)
 			0.01%Vol
 			≤10 seconds
 		
 			Nitrogen oxide ( NOX )
 			0-100ppm
 			＜±2%(F.S)
 			0.01ppm
 			≤30 seconds
 		
 			Chlorine gas ( CL2 )
 			0-10ppm
 			＜±2%(F.S)
 			0.001ppm
 			≤30 seconds
 		
 			Ammonia gas ( NH3 )
 			0-100ppm
 			＜±2%(F.S)
 			0.01ppm
 			≤30 seconds
 		
 			Hydrogen gas ( H2 )
 			0-40000ppm
 			＜±2%(F.S)
 			1ppm
 			≤30 seconds
 		
 			Nitrogen gas ( N2 )
 			0-100%Vol
 			＜±2%(F.S)
 			0.01%Vol
 			≤10 seconds
 		
 			Carbon monoxide ( CO )
 			0-100ppm
 			＜±2%(F.S)
 			0.1ppm
 			≤25 seconds
 		
 			Carbon dioxide ( CO2 )
 			0-100%Vol
 			＜±2%(F.S)
 			0.01%Vol
 			≤30 seconds
 		
 			Formaldehyde ( CH2O )
 			0-100ppm
 			＜±2%(F.S)
 			0.01ppm
 			≤30 seconds
 		
 			Ozone ( O3 )
 			0-100ppm
 			＜±2%(F.S)
 			0.01ppm
 			≤20 seconds
 		
  
Note: Not all gases and range are listed, if you need more information, please contact us.
 
 

Product Tags:

MIC500S Zetron Pump Suction Nitrogen Dioxide Detector For Explosive

Portable Multi Gas Detector

Portable Single Gas Detector

Personal Gas Detector

Fixed Gas Detector

Flue Gas Analyzer

Air Quality Monitoring Stations

Exhaust Gas Analyzer

Airborne Particle Counter

Laser Methane Detector

Online Infrared Syngas Analyzer

Open Path Infrared Gas Detector

Household Gas Alarm

Indoor Air Quality Monitors

Gas Detection Controller

Gas Detector Accessories

Integrity Test Machine

Compressed Air Quality And Purity Instruments

Gas Detector Sensor

MIC500S Zetron Pump Suction Nitrogen Dioxide Detector For Explosive

flammable gas detector and controller

gas detector supller

o2 gas detector

Gas	NO/NO2 can be customized	Range	0-100ppm other ranges can be customized
Size	210×170×85mm (L×H×W)	Weight	1.8 Kg
Installation method	Pipeline Type Wall Mounting Type	Display	1.7-inch high-definition color screen
Environment	Temperature: -40 ℃ ~ + 70 ℃ Humidity: ≤10 ~ 95% RH (regular)	Approvals	IP65; Exd Ⅱ CT6
Accessories	Manual, qualification certificate, warranty card, outer packaging box
Working Voltage	12 ~ 30VDC direct current, the standard power supply for a single equipment is 24V, DC stabilized voltage switching power supply of 1A or greater than 1A
Working Method	Fixed type installation, online detection, diffusion type measurement; and it is possible to select the measurement of pipeline type, flow-through type, and pump-suction type.
Connecting Cable	Adopted 4 ~ 20mA three-core shielding cable, adopted four-core for RS485, when the distance exceeded 100 meters, the single wire diameter ≥1.5mm; and the shielding layer will be connected to the earth.
Optional items	Alarms;Wireless Transmission;Pretreatment System; SD Card; Temperature and Humidity Measurement; Accessory for connection with computer for monitoring.
Installation Type Accessories (Optional configuration)	Wall mounting bracket, mounting clips for fixation on the pipes (1/2", 3/4" pipe), stainless steel threaded welding seat or flange to be installed on the pipeline (it is necessary to mark the flange or pipe size, such as DN50, DN15 ...), rain cover, 24VDC or 220AC sampling pump (sampling distance is 10 m), vacuum pump (sampling distance is 40 m), 24V switching power supply, pressure reducing valve, flow meters

Gases to be detected	Range	Accurancy	Resolution	Response time T90
Oxygen gas ( O2 )	0-30%Vol	＜±2%(F.S)	0.01%Vol	≤10 seconds
Nitrogen oxide ( NOX )	0-100ppm	＜±2%(F.S)	0.01ppm	≤30 seconds
Chlorine gas ( CL2 )	0-10ppm	＜±2%(F.S)	0.001ppm	≤30 seconds
Ammonia gas ( NH3 )	0-100ppm	＜±2%(F.S)	0.01ppm	≤30 seconds
Hydrogen gas ( H2 )	0-40000ppm	＜±2%(F.S)	1ppm	≤30 seconds
Nitrogen gas ( N2 )	0-100%Vol	＜±2%(F.S)	0.01%Vol	≤10 seconds
Carbon monoxide ( CO )	0-100ppm	＜±2%(F.S)	0.1ppm	≤25 seconds
Carbon dioxide ( CO2 )	0-100%Vol	＜±2%(F.S)	0.01%Vol	≤30 seconds
Formaldehyde ( CH2O )	0-100ppm	＜±2%(F.S)	0.01ppm	≤30 seconds
Ozone ( O3 )	0-100ppm	＜±2%(F.S)	0.01ppm	≤20 seconds